Jump to content
IGNORED

I want one!


Bud

Recommended Posts

Looks like fun. Really needs ABS, lots of skidding wheels in the braking demos.

 

Quadro4 Specs

Engine – 346cc single-cylinder, 4-stroke, 4-valve

Bore/Stroke – 82 X 65.5mm

Max Power – 30 hp @7500 rpm; 18 lb-ft @ 5000 rpm

Cooling – Liquid

Timing – SOHC, single overhead cam – silenced chain

Fuel – Electronic injection

Lubrication – Trochoid pump, wet-sump

Starting – Electronic

Clutch – Automatic dry centrifugal

Primary Drive – Automatic CVT with integrated differential

Final Drive – Dual drive timing belt

Homologation – Euro2 L5e

 

Chassis

Frame – Steel tubes

Suspension Front – HTS (oleo-pneumatic tilting suspension) (One or two sticks of margarine per wheel?) :/

Suspension Rear – HTS (ole-pneumatic tilting suspension)

Braking system – Hydraulic, four 240mm discs integral braking with left lever and pedal, front wheels braking with right lever

Rims Front and Rear – 2.75 x 14”

Tires Front and Rear – 110/80 x 14”

 

Dimensions

Height – 52.75 in.

Length – 85.83 in.

Seat Height – 30.32 in.

Steering Angle – 19-degrees

Tilting Angle – 45-degrees

Dry Weight – 566 pounds

Fuel Tank – 3.96 gal.

 

Seems a little heavy for the engine size. RT weight with a quarter of the HP. Still, it might work for my balance-challenged wife.

Edited by lkraus
Link to comment
Needs less plastic, more suspension, and knobbies.

 

Bill, they may have had you in mind with this vid Ad,

:grin:

 

Pat

 

It's a start, and interesting but I noticed they cut out the landing after it got some air, probably because the suspension bottomed and the results didn't make very good ad copy.

 

I'm holding out for the Black Bear edition. :grin:

 

 

 

Edited by roadscholar
Link to comment
I'm holding out for the Black Bear edition. :grin:

 

 

Window dressing more than not but, it seems like they have an eye on the

:revit:

 

PS...Mr. Poskitt has posted a couple more vids after a day's absence. Thinking crash :facepalm: but thought I heard it was just satellite issues. :dance:

 

Pat

Link to comment
It's a start, and interesting but I noticed they cut out the landing after it got some air, probably because the suspension bottomed and the results didn't make very good ad copy.

 

Funny, just think it and it's probably out there!

:ohboy:

 

Pat

 

 

 

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...