Misplaced bolt

What size, pitch, and type of screw/bolt is used to hold the right side handlebar controls on? This is the kill switch, right signal, and signal cancel piece. The screw/bolt that holds it on has been misplaced.

What size, pitch, and type of screw/bolt is used to hold the right side handlebar controls on? This is the kill switch, right signal, and signal cancel piece. The screw/bolt that holds it on has been misplaced.

Evening Tracy

A picture of the EXACT location of the screw (or screws) would help us be more precise but I t-h-i-n-k the screw you are looing for is a fillister head screw - M4X12mm long.

http://www.realoem.com/bmw/enUS/showparts?id=0418-USA-03-1996-259T-BMW-R_1100_RT_96_0413,0418_&diagId=61_0261

Number 3

I'm assuming that Csk.fillister head srew 4 X 12 means Countersunk phillips head screw 4 mm X 12 MM.

http://www.realoem.com/bmw/enUS/showparts?id=0418-USA-03-1996-259T-BMW-R_1100_RT_96_0413,0418_&diagId=61_0261

 

Number 3

Evening Tracy

You read that realoem listing as -- 03-- Csk.fillister head srew M4X12 (2 required) part number is 07119928426

M=metric-- 4= 4mm screw diameter--12= length in millimeters.-- no thread pitch given so that usually (almost always) means industry standard, so for an M-4 metric bolt that would be 0.7 thread pitch.