Tank Posted December 16, 2018 Share Posted December 16, 2018 A 2016 RT has found a stall in my stable, My question today would be , what is out there for mounting lights Link to comment
narcosis Posted December 16, 2018 Share Posted December 16, 2018 I went with the BMW auxiliary light brackets. Mounted Clearwater Darla lamps on them. Link to comment
Tank Posted December 16, 2018 Author Share Posted December 16, 2018 I Just saw those on U-tube narcosis.... thanks for the comeback.... they seem to be just what I had in mind Link to comment
BigTup Posted December 17, 2018 Share Posted December 17, 2018 I noticed that you went from an 09 to the 2016. I just did the same thing a year ago. I could not believe the difference between the two. Anyway, one thing I did notice was the lighting isn't that good. I don't drive at night that much, but if I did I would definitely be asking the same question. Link to comment
Paul De Posted December 17, 2018 Share Posted December 17, 2018 I went with the BMW auxiliary light brackets. Mounted Clearwater Darla lamps on them. +1 except I have the EZcan and generic LEDs. I like where these mounts locate the lamp and is nice a solid mount for driving lights Link to comment
Tank Posted December 17, 2018 Author Share Posted December 17, 2018 My lamp choice will not be the Clearwater....I followed a GS from Garberville Ca to Brookings Or. in the dark , can't remember the name of Gary's lamp, but it was impressive Link to comment
AndyS Posted December 17, 2018 Share Posted December 17, 2018 I went with the BMW auxiliary mounts. Onto these mounts I have BOTH the OEM Fog lights and a set of Darla's. The setup works very well. Link to comment
Bill_Walker Posted December 17, 2018 Share Posted December 17, 2018 I went with the Clearwater fork clamps for my Darlas. Link to comment
Tank Posted December 18, 2018 Author Share Posted December 18, 2018 (edited) Bill, can you shoot me a photo of the clamp on.... billiff@gmail.com Edited December 18, 2018 by Tank Link to comment
Trilegy Posted December 18, 2018 Share Posted December 18, 2018 (edited) I just installed Denali Cansmart with lights and horn. Very simple plug and play. Well thought out system with great outcome for sound and light. Feel safer already Comes with specific brackets that are well made. Edited December 18, 2018 by Trilegy Link to comment
AndyS Posted December 18, 2018 Share Posted December 18, 2018 .... Feel safer already Don't get complacent. Lights won't help at all if someone misses you and your bike with its headlights on, they will still miss you with your other stuff on too. All I'm saying is, be careful. Link to comment
Paul De Posted December 18, 2018 Share Posted December 18, 2018 I have added driving lights and an aftermarket loud horn, but agree it is only an augment the primary safety system, your situational awareness and good riding skills. It all helps! I see too many distracted drivers to count these days, so I just assume every car driver is oblivious to my presence these days. It sure is tough for the cagers to hear and see you with their ear buds in while flipping through their play list and texting someone while driving. Link to comment
Tank Posted December 19, 2018 Author Share Posted December 19, 2018 thanks Bill,, hmmmm I really did like the light following my front forks / wheel. Heck , The Darlas are looking good, nice package Link to comment
Tank Posted December 19, 2018 Author Share Posted December 19, 2018 thanks Bill,, hmmmm I really did like the light following my front forks / wheel. Heck , The Darlas are looking good, nice package Link to comment
RTinNC Posted December 19, 2018 Share Posted December 19, 2018 Late to the party but another vote for BMW brackets! Have them on my RT with Darlas and love that setup as it looks so clean. But for less $$ they also work with Denali D2's Link to comment
gordiet Posted December 24, 2018 Share Posted December 24, 2018 Illium has a bracket as well. GT Link to comment
mig Posted January 24, 2019 Share Posted January 24, 2019 I took my RT light brackets and made my own out of mild steel and then mounted inside th e lower radiator scoop. I made a template if anyone is interested Miguel 1 Link to comment
AndyS Posted January 24, 2019 Share Posted January 24, 2019 5 hours ago, mig said: I took my RT light brackets and made my own out of mild steel and then mounted inside the lower radiator scoop. I made a template if anyone is interested Miguel I do like what you have done there. Are the templates available as pdf's? Link to comment
mig Posted January 24, 2019 Share Posted January 24, 2019 I scanned the plate before I bent it and I have it somewhere, I guess its in Jpeg. I'll look for it tonight and I'll see if I can post it I had to drill thru the outer plastic to reach the inner one for the mount hole, Once bent I put some teflon wear tape on the back lower edge and when mounted, it rests on the horizontal lip and is nesttled in there tight. 2 short bolts and thats it. Link to comment
AndyS Posted January 25, 2019 Share Posted January 25, 2019 That sound good to me. Thanks. Link to comment
mig Posted January 25, 2019 Share Posted January 25, 2019 Ok here it is in PDF format, basic dimensions on the drawing and the surface where I put the wear tape on. It was made from .090" aluminum that i bought at a metal fabrication shop. I spoke to the owner about what i was making and so he sold me a piece of scarp he had that he tough would be workable, so I don't know what kind of Aluminum sheet it came from. I used basic hand tools and a small vise to bend it. Made 2 copies and folded it and held it in place while I lined up the drill and put the 2 holes I drilled the back inner plastic hole thru 1 pre existing hole on the outer black inlet plastic ( not the fairings) and the other as you see in the pictures , so only 2 holes on each side made to my new bike . If you have a 90 degree drill this should go a lot easier. Fill all edges smooth, paint, add the nuts and your ready to go. I transferred the mount nuts from the old brackets and installed the screws from the inside out to pull the nuts/brackets in and keep everything tight. painted black and they are nearly invisible. I never did look for a place to buy the mount nuts, but I am sure they are out there. The are serrated on the outer surface to give you better hold in the hole. You can always use plain nut and lock washers too. I like these because they are tucked in and out of the airflow to the radiators, and If I want to added more light , the new BMW brackets still have a place to go and will put the lights a little farther out than these. I used the old PIAA harness and used heavy duty double sided mount tape to attach the switch to the clutch cylinder. Well I hope that helps some folks. My wife says I should sell my plans, But... I guess its too late bmw brackets.pdf 1 Link to comment
alexp Posted January 26, 2019 Share Posted January 26, 2019 I went with the Ericas on a OEM Police brackets over the mirrors. Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now