BMWSportTouring BMWST DB
Previous Thread
Next Thread
Print Thread
Page 4 of 4 1 2 3 4
#1000430 - 11/07/17 04:16 PM Re: R 1200RT clutch job bits & pieces [Re: Living the Dream]  
Joined: Sep 2006
Posts: 72
dduelin Offline
Member
dduelin  Offline
Member

Joined: Sep 2006
Posts: 72
Jacksonville, FL USA
Originally Posted by Living the Dream
Originally Posted by Dann
Originally Posted by ScottT
I had my clutch replaced two and a half years ago (112k). I decided it was worth it to pay the dealer to do it for me. One of the finest decisions I ever made. I had them replace all all of the parts (except the fly wheel) and I provided the oil-resistant clutch from Beemerboneyard.com. If you're near a decent dealer and have the loot, let them do it.


Total opposite for me.;)

I'm glad I did it myself. I now have a better knowledge of how my bike is put together and saved $2k

YMMV


I don't need to have a better knowledge of how my bike is put together and besides that, my hourly rate of frustration far exceeds the $2k expense wink There's a sign in my garage that reads "Caution: Tool throwing area".
It pays well to know thyself.


Dave
2015 NC700XD
2005 ST1300
2007 R1200RT
Jax, FL
IBA #33208 MOA #133008
#1000433 - 11/07/17 04:41 PM Re: R 1200RT clutch job bits & pieces [Re: dduelin]  
Joined: Jun 2010
Posts: 13,197
dirtrider Offline
The Oracle
dirtrider  Offline
The Oracle
Member

Joined: Jun 2010
Posts: 13,197
Ohio
Originally Posted by dduelin
Is there any difference or desirability of gearboxes by year of production run '04 to '09? For fleaBay purposes?



Morning dduelin

Yes, some differences, gear ratios, color, maybe output shaft from 08 up (have to check this to be sure).

Personally I haven't put a used trans in a 1200RT yet but if I did I would probably stay with an RT trans & the use a pre 08 trans on pre 08 bike & use an 08-09 trans in an 08-09 RT bike.


D.R. ___
Sent from my rotory dial wall phone!
#1000454 - 11/07/17 08:35 PM Re: R 1200RT clutch job bits & pieces [Re: dirtrider]  
Joined: Sep 2006
Posts: 72
dduelin Offline
Member
dduelin  Offline
Member

Joined: Sep 2006
Posts: 72
Jacksonville, FL USA
Thanks DR.


Dave
2015 NC700XD
2005 ST1300
2007 R1200RT
Jax, FL
IBA #33208 MOA #133008
#1000462 - 11/07/17 11:21 PM Re: R 1200RT clutch job bits & pieces [Re: dirtrider]  
Joined: Jun 2010
Posts: 1,324
Living the Dream Offline
Member
Living the Dream  Offline
Member

Joined: Jun 2010
Posts: 1,324
Walnut Cove, North Carolina
Originally Posted by dirtrider
Originally Posted by dduelin
Is there any difference or desirability of gearboxes by year of production run '04 to '09? For fleaBay purposes?



Morning dduelin

Yes, some differences, gear ratios, color, maybe output shaft from 08 up (have to check this to be sure).

Personally I haven't put a used trans in a 1200RT yet but if I did I would probably stay with an RT trans & the use a pre 08 trans on pre 08 bike & use an 08-09 trans in an 08-09 RT bike.


Gotta watch the driveshafts as well. While the BMW parts fiche will say the used tranny will fit xx years, they don't point out that the driveshafts are slightly different.

When I had my tranny replaced (long story), I got a used tranny, emailed BMW to see if it would fit (no real help), emailed a couple of other dealerships besides the one doing the work.

All the dealerships stated, yes, the tranny will fit.....so, the tranny got put in,....but, the driveshaft diameter, or something, was off. I can't remember if it was a diameter or length thing. Either way, at 75k, I dropped an 18k tranny and 50k driveshaft in my bike,....that after a tranny rebuild that only lasted a bit over a year, which was completely out of the independent shops warranty.

The used tranny was right at $600, the driveshaft I believe was $200ish and the labor was $1300-1500(can't really remember),......shoulda just replaced the tranny from the get go.


Richard
Laborare pugnare paratus sum
2014 HP4
2010 Shadow RS
2006 R1200rt
PRC-E7
#1000491 - 11/08/17 02:27 AM Re: R 1200RT clutch job bits & pieces [Re: dduelin]  
Joined: Mar 2012
Posts: 186
Dann Offline
Member
Dann  Offline
Member

Joined: Mar 2012
Posts: 186
Laval,, QC, Canada
Quote
It pays well to know thyself.


I agree with those words of wisdom thumbsup


Daniel

If you can park it, and not turn around to admire it before walking away, you bought the wrong one.
IBA # 56396
MOA # 171966
R1200RT 2007
#1001197 - 11/19/17 03:58 AM Re: R 1200RT clutch job bits & pieces [Re: dduelin]  
Joined: Sep 2006
Posts: 72
dduelin Offline
Member
dduelin  Offline
Member

Joined: Sep 2006
Posts: 72
Jacksonville, FL USA
I finished the bike up today and went for a 40 mile ride to check it out. The clutch and transmission are quiet again and the bike seems to be running great.

[Linked Image]


Dave
2015 NC700XD
2005 ST1300
2007 R1200RT
Jax, FL
IBA #33208 MOA #133008
#1001234 - 11/19/17 06:56 PM Re: R 1200RT clutch job bits & pieces [Re: dduelin]  
Joined: Mar 2012
Posts: 186
Dann Offline
Member
Dann  Offline
Member

Joined: Mar 2012
Posts: 186
Laval,, QC, Canada
Congrats clap

Which friction disc did you end up using?
Did you change the friction pressure plate also?


Daniel

If you can park it, and not turn around to admire it before walking away, you bought the wrong one.
IBA # 56396
MOA # 171966
R1200RT 2007
#1001242 - 11/19/17 10:23 PM Re: R 1200RT clutch job bits & pieces [Re: dduelin]  
Joined: Sep 2006
Posts: 72
dduelin Offline
Member
dduelin  Offline
Member

Joined: Sep 2006
Posts: 72
Jacksonville, FL USA
I used the regular aftermarket disc sold by Beemer Boneyard. The pressure plate and housing were in good condition and I reinstalled them after dressing the surfaces.


Dave
2015 NC700XD
2005 ST1300
2007 R1200RT
Jax, FL
IBA #33208 MOA #133008
#1001244 - 11/19/17 11:11 PM Re: R 1200RT clutch job bits & pieces [Re: dduelin]  
Joined: Apr 2002
Posts: 2,265
Bernie Online
Member
Bernie  Online
Member

Joined: Apr 2002
Posts: 2,265
Jax, FL
Good job, Dave.


Bernie
Jax, FL
2018 R1200RT, Alpinweiss, starting out fresh.
2007 R1200RT, Double Silver 188,700 Smiles, SOLD
2000 R1100RT, Opal 104,000 Smiles, SOLD
BMW-MOA, BMW-RA,
AMA, BMW-NEF,
Page 4 of 4 1 2 3 4

Powered by UBB.threads™ PHP Forum Software 7.6.0
Page Time: 0.009s Queries: 15 (0.003s) Memory: 2.7951 MB (Peak: 2.9767 MB) Zlib enabled. Server Time: 2017-11-22 03:53:43 UTC