BMWSportTouring BMWST DB
Previous Thread
Next Thread
Print Thread
Page 3 of 3 1 2 3
#1023570 - 12/06/18 09:11 PM Re: Problem with ABS and bike does not start [Re: Fernando]  
Joined: Jun 2017
Posts: 15
Fernando Offline
Newer Member
Fernando  Offline
Newer Member

Joined: Jun 2017
Posts: 15
I forgot to mention that the failure of the fixed lights appeasr when purging the deposits of the handlebar and the one in the rear wheel. that is to say, when purging from the 6 purgers that there are in the servo. I have started purging those of the front and rear brake calipers and since this has to be done with the ignition on, I have seen that at that moment the lights did not fail.
At the end of purging the 6 purgers is when I hit the contact, the fault has appeared.
Brakes work OK

I have good power assist using either front lever and rear pedal.
The rear brake light work OK
Tomorrow i will try the ABS on a slippery surface and see what happens.

#1023857 - 12/12/18 05:56 PM Re: Problem with ABS and bike does not start [Re: Fernando]  
Joined: Jun 2017
Posts: 15
Fernando Offline
Newer Member
Fernando  Offline
Newer Member

Joined: Jun 2017
Posts: 15
Problem solved.There was a pin damaged.
[Linked Image]Inked20181212_172707_LI by fernando castro, en Flickr
Thanks you for your help.

Page 3 of 3 1 2 3

Powered by UBB.threads™ PHP Forum Software 7.6.0
Page Time: 0.008s Queries: 15 (0.002s) Memory: 2.7340 MB (Peak: 2.8595 MB) Zlib enabled. Server Time: 2018-12-16 18:58:48 UTC