wrchunter Posted October 23, 2016 Share Posted October 23, 2016 I have removed the rear wheel many times since buying this bike two years ago with no problems replacing the rear brake assembly on the rotor. This time I took out the pads to replace them and can't get the assembly back on and seated. The problem is with the 'non-moving' inner pad, when I put it in place it just drops down from the 'heel'. I must have lost some kind of locking part that holds it up. I read the entire instructions on the Avdrider site but still can't get the pad heel to stay in place while I place the assembly back over the rotor. I even went back to the original worn pads. Still a problem. ...HELP! Link to comment
dirtrider Posted October 23, 2016 Share Posted October 23, 2016 Afternoon wrchunter We can't see what you have through the internet but it sounds like you might have the caliper pulled into the mounting bracket so far that the pad ear is falling out the back of the slot. (maybe try centering the caliper in the mounting bracket then see if the pad stays in place) Link to comment
wrchunter Posted October 26, 2016 Author Share Posted October 26, 2016 Wow! It worked. Many, many thanks. Richard Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now