R1150RT 2004 Rear Brake Pad Replacement

I have removed the rear wheel many times since buying this bike two years ago with no problems replacing the rear brake assembly on the rotor. This time I took out the pads to replace them and can't get the assembly back on and seated. The problem is with the 'non-moving' inner pad, when I put it in place it just drops down from the 'heel'. I must have lost some kind of locking part that holds it up. I read the entire instructions on the Avdrider site but still can't get the pad heel to stay in place while I place the assembly back over the rotor. I even went back to the original worn pads. Still a problem. ...HELP!

Afternoon wrchunter

We can't see what you have through the internet but it sounds like you might have the caliper pulled into the mounting bracket so far that the pad ear is falling out the back of the slot. (maybe try centering the caliper in the mounting bracket then see if the pad stays in place)

Wow! It worked. Many, many thanks.

Richard