i-beem Posted August 3, 2017 Share Posted August 3, 2017 Diving into self-service for annual maintenance. Looking for recommendation on tools; will a 3/8 & 1/2 drive torque wrench cover or should I add a 1/4 drive as well? What's a good range of torx sockets to have on hand? (already have set of torx bits) Thanks! Link to comment
Dann Posted August 3, 2017 Share Posted August 3, 2017 These are basically all the tools I use for the maintenance on my 07 I use 3/8 drives except for some sockets that I only have for 1/4 drive. T20 Torx socket T25 Torx socket T30 Torx socket T40 Torx socket T45 Torx socket T50 Torx socket T55 Torx socket T25 key (90 deg) 8mm Hex socket 8 mm - deep socket 8 mm - socket 7 mm - socket 14mm - socket 15 mm - deep socket (For exhaust clamp) 15 mm - socket 16 mm - deep socket (ITC -Thin wall for Spark plugs) 17mm - socket 19 mm - socket small adjustable wrench 8 mm key 10 mm key (x2 for throttle body sync) Ratchet extention (6") Socket screw driver handle Screwdriver bit socket Screwdriver bits Oil filter wrench Oil cap tool Spark plug puller tool Front axle tool Torque wrenchs 2.4 - 145nm (You will not need more than 60nm unless you remove the FD) GS-911 (turn off dealer service light on 08+ & diagnostics) Hope this helps Link to comment
i-beem Posted August 3, 2017 Author Share Posted August 3, 2017 Awesome - thanks Dann Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now